The common guide to buying cornice in easy way

The straightness and fineness of the cornice is very important. With the common guide to buying cornice,people can buy them in easy way.

The apex line is also called the shadow line. The apex line is a kind of building material. It is the place where the wall and the ceiling are combined, and the straightness and fineness of the apex line will affect people’s aesthetic requirements. The following is an introduction to the installation method of the corner line and the tips for purchasing the corner line.

Tips

1. Look at the thickness
The vertex line must have a corresponding thickness, so as to ensure the affinity between the molecules, thereby ensuring the service life and safety during the service life.
2. Look at the finish
Choose the top corner line with good finish, so that the decoration effect will be more beautiful.
3. Look at the pattern

The pattern of the high-quality vertex line is more obvious and fine. After installation, it can maintain the three-dimensional effect after the surface is painted.
The top corner line is made by pasting. Before installation, the wall surface and the top corner line should be leveled. There should be no gap between the two, so as to ensure a stronger bond, and then perform the spring line work to ensure that the paving is at the same time. In a plane.
Install the vertex line strictly, and apply adhesive to the vertex line, but be careful not to exceed the width of the vertex line, and then align the mosaic shape to keep the connecting surface on both sides flat, and then compact it by hand. Finally, clean up the spilled adhesive and smooth the joints with putty.

In addition to fixing with an adhesive, you can also use a nail gun to fix it, which can better ensure the adhesion of the top corner line. Sometimes it needs to be polished, and then brush some latex paint to prevent dust from sticking. It is not hard to work with them from pu cornice manufacturer in china.